This controller will allow you to precisely monitor and control the environment in your grow room.

Featuring an easy to use analog interface, this digital controller is easy to program and use. Each set point (temperature, humidity and CO2) are programmed using a set of dedicated knobs. Readings are displayed on easy to read digital displays.

The sensor which measures the temperature, humidity, light and CO2 levels in your room is attached to the controller with a 15ft (457cm) cord. Enclosure resists dust, rust and moisture.

Features:

- Max Amp: 10 Amps, 220~240V, 50Hz,
- Sensor Cord Length: 15 feet (457cm)
- CO2 Range: 400-2000 PPM
- CO2 Accuracy: +/-100 PPM
- CO2 Dead-Band (Hysteresis): 50-500 PPM
- Temp Setting: Adjustable 40°-122° F (5-50)
- Temp Dead-Band (Hysteresis): Adjustable 2°/4°/6° F(1/2/3)
- Temp accuracy: +/-2° F(+/-1)
- High Temp Limit Adjustable: 85°-115° F(30-45)
- Low Temp Adjustable: 40°-70° F(5-20)
- Humidity Setting Range: 5%-95% rH
- Humidity Accuracy: +/-3% rH
- Humidity Dead-Band (Hysteresis): 5% rH
- Weight: 3.5lbs
- Dimensions: 8 x 7.5 x 3.3
- Indoor Use Only
- Operating Temperature: 50°F to 95°F (10 to 35)
- Maximum Relative Humidity: 95%